These screws will fit Harley Electra Glides, Classics, Street Glides, Ultra Glides, and other models that have 1/4-20 thread that holds the fairing and the windshield secure. Three (3) of the screws and washers can be used with or without a Flat windshield trim piece. The washers give the screw better holding power, and fewer scratches from the twisting against the chrome trim. The other four (4) screws are a replacement for the two inner fairing Torx screws below the speakers on the left and right side of the fairing and the other two (2) screws are used at the lower part of the inner fairing between the forks. All the screws are Hex Head Socket Cap Screws. Much easier to work with than the stock Torx screws. Less chance of stripping and you are able to tighten them much easier. On some year models, the lower 4 screws are not always the same size. Please check to make sure yours are all the same thread pitch if you are planning to change all 7 screws.
You will receive:
7-Stainless Hex/Button Head Socket Head Screws
3-Stainless Steel Washers
1-Allen Wrench Installation Tool
Exclusive Manufacturer, HDsmallPARTS, LLC
HDsmallPARTS, LLC PO Box 1737 Chatsworth, Ga. 30705
HDsmallPARTS, LLC is not affiliated with Harley-Davidson® Motor Company
Copyright © – 2014-2022 HDsmallPARTS LLC All rights reserve
